ACTIVE LINE ARRAY SYSTEM
VL210DSP
VL210DSP built-in DSP
ETG home > VL DSP Series > VL210DSPDouble 10-inch active two-way line array speakers
80°x 12° (determined by the curvature effect of the array)
Quick hanging system
Steel hanging parts
1.2mm high strength steel mesh
High quality birch plywood
Rugged tour-grade textured paint
| Parameter | VL210DSP |
|---|---|
| Transducer： | |
| HF Driver | Two constant directivity horn 1 inch opening, the compressed high frequency drive unit 120mm ferrite magnet, 44mm voice coil AES Power: 60W, Program Power: 120W, impedance: 8Ω |
| Woofer | Two 10 inch low frequency units 1560mm ferrite magnet, 65mm voice coil AES Power: 250W, Program Power: 500W, impedance: 8Ω |
| Cabinet： | |
| Board | High quality birch plywood |
| Surface | Rugged tour-grade textured paint |
| Net | 1.2mm thick 6mm hexagonal iron mesh with black flat powder on the surface |
| Horn | Foaming |
| Flying Points | Quick hanging system |
| Handle | Left and right |
| Base | N/A |
| Acoustic | |
| Frequency Response -6dB | 80Hz ~ 18KHz |
| Max SPL | 125/126dB |
| Nominal Coverage (H*V) | 80x12 (determined by array curvature effect) |
| Amplifier | |
| Type | 2-Channel Class-D |
| Output power | 2x500W |
| THD | 0.05% |
| Cooling | Aluminum alloy radiator |
| DSP | |
| A/D converter | 24bit Cirrus logic 48kHz |
| D/A converter | 24bit Cirrus logic 48kHz |
| Delay | Low: -12dB/Oct; High: -12dB/Oct |
| EQ | Input 120ms + output 20ms |
| Hi/Low pass Filter | IIR：Hi/Low shelf，PEQ，Allpass |
| Compressor | RMS compression |
| Limiter | Peak Cut |
| Control | |
| Display | Color display |
| Indicator Light | Protection / Overload / Signal |
| PC | Mconsole Software |
| Connecting | |
| Power | PowerCON input / output |
| Interface | TCP/IP，USB，RS485 |
| Analog | Balanced XLR female input, XLR male output |
| Digital | N/A |
| Gain | Input attenuation control |
| Dimension（W×D×H） | 580x580x285mm |
| Weight | 20Kg |